Skip to content

Sullivan-Palatek Technical Reference

Air Treatment & Condensate Management Specification Sheet

Aftercooler & Dryers

Portable air treatment skid configurations for aftercooling, moisture removal and drying.

01 / Technical reference

Document overview

Portable air treatment skid configurations for aftercooling, moisture removal and drying. The manufacturer sheet describes a regenerative desiccant dryer, aftercooler, prefilter, and skid dimensions.

Published technical specifications

Aftercooler / dryer skid size comparison

Scroll sideways to compare all model columns.

Aftercooler / dryer skid size comparison
ModelHeight (in)Length (in)Width (in)Weight (lb)
SPS-500RS86.0060.5050.002,300
SPS-1000RS96.0075.0062.383,655
SPS-1600RS103.5096.0073.004,918
SPAF-500RS58.0045.0029.00400
SPAF-1000RS68.0050.5038.001,434
SPAF-1600RS71.0067.0048.001,652

SPS and SPAF are distinct package families; exact equipment inclusions should be selected from the current manufacturer quotation.

Published equipment features

  • SPS packages describe an aftercooler, coalescing prefilter and regenerative dryer with a published -40 degrees F pressure dew point.
  • Published family capacity range is 100-4,000 CFM, not a rating for every model shown.
  • Control filtration, coalescing element and centrifugal separator are listed.

Application guidance

Use this reference when reviewing equipment sizing, pressure drop, filtration grade and environmental conditions. Select air treatment by actual demand, air quality targets and the particular device specifications.

Technical questions / Manufacturer reference

Frequently asked questions

Which air-treatment skid product families appear in the aftercooler and dryer reference?

The source lists SPS-500RS, SPS-1000RS, SPS-1600RS; SPAF-500RS, SPAF-1000RS, SPAF-1600RS. Check the size matrix for the specific skid.

What airflow range does the aftercooler and dryer reference cover?

The manufacturer publication lists 100-4,000 CFM. Actual sizing depends on conditions and equipment configuration.

What dew-point target is listed for the dryer?

The publication lists a dryer outlet dew-point target of -40 F. Confirm the conditions associated with that figure in the source PDF.

Specifications depend on the model, configuration and document revision. Consult the manufacturer PDF linked on this page for the complete reference.

Need help with the next step?

Find the right compressor solution.

Discuss your required airflow, operating pressure, installation conditions or model selection with the Sullivan-Palatek sales team.