The CDD is a practical solution to the problems of oil, water vapor and contaminants in compressed air systems. It supplies clean, dry air for critical applications.
Compressed air, a reliable source of pneumatic power in many applications, is adversely affected by oil, dirt, and water. In a variety of applications (automotive paint booths, concrete plants, and general manufacturing facilities, for example) moisture, particulate, and oil in compressed air lines contribute to lower productivity, higher operating costs, and increased maintenance.
The CDD 3-in-1 duplex system typically requires less than 10% of air for regeneration and achieves a -40º F pressure dew point for flow rates of up to 200 cfm. The modular design allows for expansion to accommodate changes in air system requirement of flow rates from 40 cfm to 200 cfm.
Features & Benefits
- Unload shutdown
- The solid aluminum hard coat anodize provides superior strength and corrosion resistance
- Pre-filtration units can handle up to a quart of liquid per minute
- Offers low dew points, and consistently drops relative humidity below 10%
- No need for float drains on the pre-filtration parts
| Model | Horsepower (hp) | Capacity (cfm) | Pressure (psi) | Motor Speed (rpm) |
|---|---|---|---|---|
| M-5CDD | 5 | 22 | 125 | 1755 |
| M-H5CDD | 5 | 18 | 150 | 1755 |
| M-HH5CDD | 5 | 15.5 | 175 | 1755 |
| M-7.5CDD | 7.5 | 26 | 125 | 3530 |
| M-H7.5CDD | 7.5 | 25 | 150 | 3530 |
| M-HH7.5CDD | 7.5 | 22 | 175 | 3530 |
| M-10CDD | 10 | *40.7 | 125 | 3515 |
| M-H10CDD | 10 | 35 | 150 | 3515 |
| M-HH10CDD | 10 | 31 | 175 | 3515 |
| D-15CDD | 15 | *50.1 | 125 | 1750 |
| D-H15CDD | 15 | 47 | 150 | 1750 |
| D-20CDD | 20 | *80.2 | 125 | 1750 |
| D-H20CDD | 20 | 78 | 150 | 1750 |
| D-HH20CDD | 20 | 53 | 175 | 1750 |
| D-25CDD | 25 | 110 | 125 | 3550 |
| D-H25CDD | 25 | 92 | 150 | 3550 |
| D-HH25CDD | 25 | 80 | 175 | 3550 |
| D4-25CDD | 25 | 95 | 125 | 1750 |
| D4-H25CDD | 25 | 90 | 150 | 1750 |
| D4-HH25CDD | 25 | 78 | 175 | 1750 |
| DG-30CDD | 30 | *125.1 | 125 | 1750 |
- Manufacturing
- Small Industrial Settings
MCC Series Options
- Acoustical enclosure: Easily removable panels for faster maintenance and accessibility while keeping it quiet
- Auto restart Eliminates having to reset the compressor following a power failure shutdown
- Inlet modulation control Balances the intake air with the plant requirement by throttling the inlet valve opened or closed
- Lubricant: Factory fill with Pallube 32, Pal-Extra 44, AFX 32, or Food Grade lubricant
- Microprocessor Reads pressure, total running hours, on-load hours, and oil temperature
- Separator trap: Captures and automatically drains condensed water, oil, and dirt
- Tank mounted: ASME coded 80, and 120 gallon with auto drain
- TEFC motor
- Voltage 230/1/60 water cooled
DCDD/DGCDD Series Options
- Acoustical enclosure: Acoustical enclosure: Easily removable panels for faster maintenance and accessibility while keeping it quiet
- Cold weather/low ambient package
- Deluxe gauge panel: Line pressure gauge, discharge pressure gauge, hour meter, temperature gauge, lube filter, and separator element differential gauges
- HATD shutdown switch: Shuts the compressor if high discharge air temperature is sensed
- Lubricant: factory fill with Pallube 32, Pal-Extra 44, AFX 32, or Food Grade lubricant
- Platform mounted: 19″ high to keep your unit off the ground and for easy maintenance
- Separator trap: Captures and automatically drains condensed water, oil, and dirt
- Tank mounted: ASME coded 120, and 200 gallon with auto drain
*Capacity in accordance with CAGI / ISO 1217 (Annex C / Annex E)