01 / Technical reference
Document overview
D260 utility-mount diesel compressor operating ratings and service layout. The utility-mount configuration features curbside service access, an industrial air end, and truck-mount dimensions.
Published technical specifications
D260UJD4PTOW compressor
| Specification | Published value |
|---|---|
| Rated delivery at 100 psig | 260 CFM |
| Operating pressure range | 70-125 psig |
| Estimated serviced weight | 3,070 lb |
| Dimensions (L x W x H) | 83 x 35 x 55.39 in |
| Air-end diameter | 127 mm |
D260UJD4PTOW engine
| Specification | Published value |
|---|---|
| Engine | John Deere 4045TFCO3A/B Tier 4 Final |
| Idle speed | 1,600 RPM |
| Full-load speed | 2,500 RPM |
| Rated power | 74 HP |
| Fuel tank | 35 gal |
Published equipment features
- Utility-mount package with curbside service and end-mounted drains.
- Two 3/4 in service connections; high-low selector requires PTO in low-pressure mode.
- Automatic capacity control, side-by-side coolers and protective shutdown.
Application guidance
Use this reference when reviewing compressor flow, pressure selection, truck-mount clearance and curbside service access. Confirm chassis mounting and vehicle installation constraints with the current manufacturer document.
Technical questions / Manufacturer reference
Frequently asked questions
What delivery and rated pressure are listed for D260UJD4PTOW?
The source lists 260 CFM at 100 psi.
What pressure range does D260UJD4PTOW publish?
The manufacturer specification lists 70-125 psi.
What should be checked before mounting a D260UJD4PTOW on a vehicle?
Use this reference when reviewing compressor flow, pressure selection, truck-mount clearance and curbside service access. Confirm chassis mounting and vehicle installation constraints with the current manufacturer document.
Specifications depend on the model, configuration and document revision. Consult the manufacturer PDF linked on this page for the complete reference.